Ricoh G133 Service Manual page 439

[Thick 4: Leading Edge Correction] Thick 4 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading
2674
edge in each mode. SP2671 and SP2672 are multiplied by these SP values.
The paper leading edge area can be adjusted with SP2675.
001 Paper Transfer: 1st Side
002 Separation DC: 1st Page
[Thick 4: L Edge: Timing]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2675
plate at the paper leading edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side
002 Separation DC: 1st Page
[Thick 4: Trailing Edge Correction] Thick 4 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
2676
edge in each mode. SP2671 and SP2672 are multiplied by these SP values.
The paper trailing edge area can be adjusted with SP2677.
001 Paper Transfer: 1st Side
[Thick 4: T Edge: Timing]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
2677
plate at the paper trailing edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side
SM
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 30 / 0 / 1 mm/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG [–100 to 0 / 0 / 1 mm/step]
5-117
Service Mode Table
G133