Ricoh G133 Service Manual page 308

Jam Detection
Jam Code
SP
Finisher Stack 2
7504 147
Release Motor (B793)
Finisher Stopper
7504 148
Motor (B793)
Finisher Entrance:
7504 191
EUP (B805)
Finisher Proof Exit:
7504 192
EUP (B805)
Finisher Shift Tray
7504 193
Exit: EUP (B805)
Finisher Stapler Exit:
7504 194
EUP (B805)
Finisher Exit: EUP
7504 195
(B805)
G133
Display
Paper does not reach the finisher
entrance sensor or stays at the finisher
entrance sensor.
Paper does not reach the proof tray exit
sensor or stays at the proof tray exit
sensor.
Paper does not reach the upper tray exit
sensor or stays at the upper tray exit
sensor.
Description
Lower clamp roller HP sensor does
not turn off after the lower clamp
roller has moved from its home
position.
Lower clamp roller HP sensor does
not turn on after the lower clamp
roller has returned to its home
position.
Stopper S HP sensor does not turn
off after the stopper S has moved
from its home position.
Stopper S HP sensor does not turn
on after the stopper S has returned
to its home position.
Stapling tray paper sensor does not
turn on after the finisher entrance
sensor has turned on.
Stapling tray paper sensor does not
turn off after it has turned on.
Upper tray exit sensor does not turn
on while the stack feed-out belt is
4-92
LCD
Display
R7-R11
R7-R11
R1-R4
R1-R4
R1-R4
R5-R8
R8-R12
SM