Ricoh G133 Service Manual page 334

Service Mode Table
(Tray Location, Paper Type, Color Mode), Paper Type -> Plain, Thick 1or Thick
2
Adjusts the leading edge registration by changing the registration clutch
operation timing for each mode.
001 Tray: Plain
002 Tray: Thick 1
003 Tray: Thick 2
004 By-pass Table: Plain
005 By-pass Table: Thick 1
006 By-pass Table: Thick 2
007 Duplex: Plain
008 Duplex: Thick 1
009 Tray: Thin
010 Tray: Middle Thick
011 By-pass: Thin
012 By-pass: Middle Thick
013 By-pass: Thick 3
014 Duplex: Thin
015 Duplex: Middle Thick
[Side to Side Reg.] Side-to-Side Registration Adjustment
1002
Adjusts the side-to-side registration by changing the laser main scan start
position for each mode.
001 By-pass Table
002 Paper Tray 1
G133
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
[–9 to 9 / 0.0 / 0.1 mm/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG [–4 to 4 / 0.0 / 0.1 mm/step]
*ENG
5-12 SM