Ricoh G133 Service Manual page 538

Service Mode Table
093 CERT: St Exp Time
094 CERT: End Exp Time
200 Polling Man Exc
Instl: Condition
Displays a number that indicates the status of the @Remote service device.
0: Neither the registered device by the embedded RCG nor embedded RCG
device is set.
1: The embedded RCG device is being set. Only Box registration is
completed. In this status the external RCG unit cannot answer a polling
201
request.
2: The embedded RCG device is set. In this status the external RCG unit
cannot answer a polling request.
3: The registered device by the embedded RCG is being set. In this status the
embedded RCG device cannot be set.
4: The registered module by the embedded RCG has not started.
202 Instl: ID #
203 Instl: Reference
Instl: Ref Rslf
Displays a number that indicates the result of the inquiry executed with
SP5816 203.
0: Succeeded
204
1: Inquiry number error
2: Registration in progress
3: Proxy error (proxy enabled)
4: Proxy error (proxy disabled)
G133
@Remote certification. CN = the following 30
bytes. Asteriskes () indicate that no DESS exists.
Displays the start time of the period for which the
current @Remote certification is enabled.
Displays the end time of the period for which the
current @Remote certification is enabled.
- Executes the manual polling.
Allows entry of the number of the request needed
for the embedded RCG device.
Executes the inquiry request to the @Remote
GateWay URL.
5-216 SM