Ricoh G133 Service Manual page 537

083 Firm Updating
084 Firm Up Flg No HDD
085 Firm Up User Conf
086 Firmware Size
087 CERT: Macro Version
088 CERT: PAC Version
089 CERT: ID2 Code
090 CERT: Subject
091 CERT: Serial Number
092 CERT: Issuer
SM
Displays the status of the firmware update.
This setting determines if the firmware can be
updated, even without the HDD installed.
0: Not allowed update
1: Allowed update
This SP setting determines if the operator can
confirm the previous version of the firmware before
the firmware update execution. If the option to
confirm the previous version is selected, a
notification is sent to the system manager and the
firmware update is done with the firmware files
from the URL.
Allows the service technician to confirm the size of
the firmware data files during the firmware update
execution.
Displays the macro version of the @Remote
certification.
Displays the PAC version of the @Remote
certification.
Displays ID2 for the @Remote certification.
Spaces are displayed as underscores (_).
Asteriskes () indicate that no @Remote
certification exists.
Displays the common name of the @Remote
certification subject. CN = the following 17 bytes.
Spaces are displayed as underscores (_).
Asterisks () indicate that no DESS exists.
Displays serial number for the @Remote
certification. Asterisks () indicate that no DESS
exists.
Displays the common name of the issuer of the
5-215
Service Mode Table
G133