Ricoh G133 Service Manual page 450

Service Mode Table
Paper Transfer: FINE: 1st Side:
015
S4
Paper Transfer: FINE: 2nd
016
Side: S4
Paper Transfer: Plain: 1st Side:
017
S5
Paper Transfer: Plain: 2nd
018
Side: S5
Paper Transfer: FINE: 1st Side:
019
S5
Paper Transfer: FINE: 2nd
020
Side: S5
[Special 1: Leading Edge Correction] Special 1 Paper: Leading Edge
Correction
Adjusts the correction to the paper transfer roller current at the paper leading
2771
edge in each mode. SP2753 and SP2757 are multiplied by these SP values.
Plain: 205 mm/sec, Fine: 77 mm/sec
The paper leading edge area can be adjusted with SP2772.
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: FINE: 1st Side
004 Paper Transfer: FINE: 2nd Side
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2751 is multiplied by these SP values.
2771
The paper leading edge area can be adjusted with SP2772.
005 Separation DC: Plain: 1st Page
G133
*ENG
[100 to 600 / 140 / 5%/step]
210 mm ≥ S4 size ≥ 148 mm
(Paper width)
*ENG
[100 to 600 / 180 / 5%/step]
*ENG
148 mm ≥ S5 size (Paper width)
[100 to 600 / 240 / 5%/step]
*ENG
148 mm ≥ S5 size (Paper width)
*ENG
[100 to 600 / 150 / 5%/step]
148 mm ≥ S5 size (Paper width)
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[0 to 400 / 150 / 5%/step]
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
5-128 SM