Ricoh G133 Service Manual page 431

edge in each mode. SP2603 and SP2608 are multiplied by these SP values.
The paper trailing edge area can be adjusted with SP2624.
001 Paper Transfer
[OHP: T Edge: Timing]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
2624
plate at the paper trailing edge between the erase margin area and the image
area.
001 Paper Transfer
[OHP: LL] OHP: LL Environment Coefficient Adjustment
2631
Adjusts the environment coefficient for each mode. When the environment is
detected as LL, SP2603 and SP2608 are multiplied by these SP values.
001 Paper Transfer
Adjusts the environment coefficient for each mode. When the environment is
2631
detected as LL, SP2601 is multiplied by these SP values.
002 Separation DC
[OHP: ML] OHP: ML Environment Coefficient Adjustment
2632
Adjusts the environment coefficient for each mode When the environment is
detected as ML, SP2603 and SP2608 are multiplied by these SP values.
001 Paper Transfer
Adjusts the environment coefficient for each mode. When the environment is
2632
detected as ML, SP2601 is multiplied by these SP values.
002 Separation DC
SM
*ENG [0 to 400 / 100 / 5%/step]
*ENG [–100 to 0 / 0 / 1 mm/step]
*ENG
[10 to 250 / 80 / 5%/step]
*ENG [10 to 250 / 120 / 5%/step]
*ENG [10 to 250 / 90 / 5%/step]
*ENG [10 to 250 / 110 / 5%/step]
5-109
Service Mode Table
G133