Ricoh G133 Service Manual page 522

Service Mode Table
[Display IP Address]
5055
Display or does not display the IP address on the LCD.
001 -
[Coverage Counter Display]
5056
Display or does not Display the coverage counter on the LCD.
001 -
[A3/DLT Double Count] SSP
5104
Specifies whether the counter is double clicked for A3/DLT size prints.
When you have to change this SP, ask your supervisor.
5104 1 A3 Double Count
[Paper Size Type
5131
Selection]
The program selects a paper size system from the following alternatives: the
001
AB system (0), the LT system (1), and the AF system (2).
[CE Login]
5169
If you will change the printer bit switches, you must 'log in' to service mode with
this SP before you go into the printer SP mode.
001 CE Login
G133
[0 or 1 / 0 / - ]
*CTL
0: OFF 1: ON
[0 or 1 / 0 / - ]
*CTL
0: Not display, 1: Display
[0 to 2 / 0 / 1 /step]
0: NO (Normal count)
*CTL 1: YES (Double count)
2: YES except By-pass (Normal count for
unknown size)
*ENG [0: JP (Japan)/ 1: NA / 2: EU]
*CTL [0 or 1 / 0 / - ]
5-200 SM