Ricoh G133 Service Manual page 396

Service Mode Table
Adjusts the current for the image transfer belt for Yellow in full color mode for
thick 1 paper.
Image Transfer: Thick 2 &
FINE: Bk
009
Adjusts the current for the image transfer belt for Black in full color mode for
Thick 2 and fine.
Image Transfer: Thick 2 & FINE: M
010
Adjusts the current for the image transfer belt for Magenta in full color mode for
Thick 2 and fine.
Image Transfer: Thick 2 & FINE: C
011
Adjusts the current for the image transfer belt for Cyan in full color mode for
Thick 2 and fine.
Image Transfer: Thick 2 & FINE: Y
012
Adjusts the current for the image transfer belt for Yellow in full color mode for
Thick 2 and fine.
[Common: LL]
Adjusts the environment coefficient for each mode. When the environment is
2381
detected as LL, SP2351 and SP2357 are multiplied by these SP values.
Plain: 205 mm/sec, Thick 1: 115 mm/sec, Thick 2&Fine: 77 mm/sec
001 Image Transfer: Plain
002 Image Transfer: Thick 1
Image Transfer: Thick 2 &
003
FINE
Image Transfer: P/M
004
Pattern
G133
[0 to 80 / 11 / 1 μA]
*ENG
[0 to 80 / 11 / 1 μA]
*ENG
[0 to 80 / 12 / 1 μA]
*ENG
[0 to 80 / 15 / 1 μA]
*ENG
*ENG [10 to 250 / 70 / 5%/step]
*ENG
[10 to 250 / 80 / 5%/step]
*ENG [10 to 250 / 80 / 5%/step]
[10 to 250 / 100 / 5%/step]
*ENG P/M Pattern: When doing process control
or automatic line position adjustment.
5-74 SM