Ricoh G133 Service Manual page 339

058 Special 1: FC: Simplex
060 Special 1: FC: Duplex
062 Special 1: BW: Simplex
064 Special 1: BW: Duplex
066 Special 2: FC: Simplex
068 Special 2: FC: Duplex
070 Special 2: BW: Simplex
072 Special 2: BW: Duplex
074 Special 3: FC: Simplex
076 Special 3: FC: Duplex
078 Special 3: BW: Simplex
080 Special 3: BW: Duplex
Target Temp. After
Ready
082
Specifies the target temperature for the maintain mode after the machine has
reached the target temperature in warm-up mode.
Recovery Target Temp.
083
Specifies the target temperature for the print mode without printing/copying job
after the machine's recovery.
Print Start: Offset
085
Specifies the paper feed start temperature. This value is the offset temperature
in relation to the target temperature for the print ready mode.
Feed Start: Offset
086
Specifies the image processing start temperature. This value is the offset
temperature in relation to the target temperature for the print ready mode.
SM
*ENG
*ENG
[100 to 200 / 160 / 1°C/step]
*ENG
*ENG
*ENG
*ENG
[100 to 200 / 160 / 1°C/step]
*ENG
*ENG
*ENG
*ENG
[100 to 200 / 160 / 1°C/step]
*ENG
*ENG
*ENG [100 to 200 / 160 / 1°C/step]
*ENG [100 to 200 / 170 / 1°C/step]
*ENG
[0 to 100 / 5 / 1°C/step]
*ENG [0 to 100 / 5 / 1°C/step]
5-17
Service Mode Table
G133