23) Fill engine coolant.
<Ref. to CO-26, FILLING OF ENGINE COOLANT,
REPLACEMENT, Engine Coolant.>
24) Check the ATF level and correct if necessary.
(AT model)
<Ref. to AT-9, INSPECTION, Automatic Transmis-
sion Fluid.>
25) Charge the A/C system with refrigerant.
<Ref. to AC-22, OPERATION, Refrigerant Charg-
ing Procedure.>
26) Remove the front hood stay, and then close the
front hood.
27) Take off the vehicle from lift arms.
ENGINE ASSEMBLY
C: INSPECTION
1) Make sure the pipes and hoses are installed cor-
rectly.
2) Make sure the engine coolant and ATF are at
specified levels.
ME-41
MECHANICAL