Subaru 2002 IMPREZA Service Manual page 158

FUEL INJECTION (FUEL SYSTEMS)
B: INSTALLATION
1) Support the fuel tank with transmission jack and
push the fuel tank harness into access hole with
grommet.
2) Set the fuel tank and temporarily tighten the
bolts of fuel tank bands.
WARNING:
A helper is required to perform this work.
3) Connect the two-way valve hose (A) to two-way
valve and connect the canister hose (B) to canister.
(A)
4) Connect the fuel filler hose and air vent hose.
FUEL TANK
EN0541
(B)
EN0840
EN0539
FU-56
5) Connect the fuel hoses, and secure them with
clips and quick connector.
<Ref. to FU-73, INSTALLATION, Fuel Delivery,
Return and Evaporation Lines.>
6) Tighten the band mounting bolts.
Tightening torque:
33 N·m (3.4 kgf-m, 24.3 ft-lb)
7) Install the rear crossmember. <Ref. to RS-21,
INSTALLATION, Rear Crossmember.>
8) Connect the connector (A) to fuel tank cord and
plug the service hole with gromment (B).
(A)
9) Set the rear seat and floor mat.
EN0540
EN0541
(B)
EN0537