Subaru 2002 IMPREZA Service Manual page 167

23.Fuel Level Sensor
A: REMOVAL
WARNING:
• Place "NO FIRE" signs near the working area.
• Be careful not to spill fuel on the floor.
NOTE:
Fuel level sensor is built in the fuel pump assembly.
1) Remove the fuel pump assembly.
<Ref. to FU-62, REMOVAL, Fuel Pump.>
2) Disconnect the connector from fuel pump brack-
et.
• 1600 cc and 2000 cc MODEL
• 2500 cc MODEL
FUEL LEVEL SENSOR
3) Remove the bolt which installs fuel level sensor
on mounting bracket.
• 1600 cc and 2000 cc MODEL
• 2500 cc MODEL
EN0559
B: INSTALLATION
Install in the reverse order of removal.
S2M0145
FU-65
FUEL INJECTION (FUEL SYSTEMS)
EN0560
EN0846
S2M0145