Mlppp Configuration - Samsung Ubigate iBG3026 Configuration Manual

CHAPTER 8. PPP, MLPPP, and HDLC

MLPPP Configuration

This section shows how to confiure the router at site 1 with MLPPP.
Configuring Ubigate iBG3026 at Site 1
Configuring Step
Step
1
2
3
4
5
6
Configuring Example
R1# configure terminal
R1/configure# interface bundle MLPPP
R1/configure/interface/bundle MLPPP# link t1 0/2/0
R1/configure/interface/bundle MLPPP# encapsulation ppp
R1/configure/interface/bundle MLPPP# mlppp seg_threshold
1400 differential_delay 50
R1/configure/interface/bundle MLPPP# ip address 192.168.1.2
24
R1/configure/interface/bundle MLPPP# exit
62
Command
Router# configure terminal
Router/configure# interface bundle
[bundle name]
Router/configure/bundle/[bundle
name]# link t1 1/0-3
Router/configure/bundle/[bundle
name]# encapsulation ppp
Router/configure/bundle/[bundle
name]# ip address [IP address]
{ [bit mask] | [number of bits for
mask] }
Router/configure/bundle/[bundle
name]# exit
Purpose
Goes into the terminal
configuration mode.
Sets a bundle interface. 'bundle
name' represents a specific
bundle interface to be configured
at the moment.
Links a channelized T1 interface
to a wan interface
Selects PPP as an encapsulation
method.
Sets an IP address for the
interface.
Returns to the upper
configuration mode.
© SAMSUNG Electronics Co., Ltd.