Table of Contents
Advertisement
Router B at Site 2 serves as the Frame Relay termination point, connecting the
Site 2 IP network to Router A. This MFR bundle utilizes 2 T1 links for an
approximate 3 Mbps bandwidth. Since it is the Frame Relay terminating point
and is defined as a DTE frame relay interface, an IP address is assigned to the
WAN bundle.
Configure the Router B at Site 2
Router/configure# int bundle frame1
Router/configure/interface/bundle frame1# link t1 0/1/0-1
Router/configure/interface/bundle frame1# description "3
Mbps to the Internet"
Router/configure/interface/bundle frame1# encap fr
Router/configure/interface/bundle frame1# fr
Router/configure/interface/bundle frame1/fr# intf_type dte
Router/configure/interface/bundle frame1/fr# lmi ansi
Router/configure/interface/bundle frame1/fr/lmi# keepalive
10
Router/configure/interface/bundle frame1/fr/lmi# exit
Router/configure/interface/bundle frame1/fr# pvc 31
Router/configure/interface/bundle frame1/fr/pvc# shaping cir
3072000 bcmax 3072000 bcmin 1536000
Router/configure/interface/bundle frame1/fr/pvc# ip address
10.0.2.1 255.255.255.0
Router/configure/interface/bundle frame1/fr/pvc# enable
Router/configure/interface/bundle frame1/fr/pvc# exit
Configure the Router Interface connecting to Router B
Router/configure# int bundle to1400
Router/configure/interface/bundle to1400# link t1 0/2/0-1
Router/configure/interface/bundle to1400# description "3Mbps
MFR to 1400"
Router/configure/interface/bundle to1400# encap fr
Router/configure/interface/bundle to1400# fr
Router/configure/interface/bundle to1400/fr# intf_type dce
Router/configure/interface/bundle to1400/fr# lmi ansi
Router/configure/interface/bundle to1400/fr/lmi# keepalive
10
Router/configure/interface/bundle to1400/fr/lmi# exit
Router/configure/interface/bundle to1400/fr# pvc 31
Router/configure/interface/bundle to1400/fr/pvc# exit 3
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG3026 Configuration Guide/Ed.00
71
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
