Samsung Ubigate iBG3026 Configuration Manual page 446

CHAPTER 28. SIP Gateway Management
Step
3
4
Configuring SRTP support
This section describes the SRTP function to encode and deliver a media packet.
SRTP encodes and sends the media packet using the key exchanged via SIP
signaling, and the receiving party decodes the encrypted media packet to
support the security of media level. To use this SRTP, it is necessary to specify
crypto suite to a dial-peer where SRTP will be used.
Configuration Steps
configure terminal
−
dial-peer
−
srtp crypto
−
exit
−
Detailed Steps
Step
1
2
404
Command
smime prvkey file-name cert file-name
[forced]
Example)
configure/ dial-peer/voice/pots
11#smime prvkey prvkey11.pem cert
cert11.pem
exit
Example)
configure/ dial-peer/voice/pots 11# exit
Command
configure terminal
Example)
# configure terminal
dial-peer voice {pots | voip} tag
Example)
/configure# dial-peer voice voip 100
Purpose
Specifies file names of certificate
and private key for S/MIME.
Exits the current mode
Purpose
Enters global configuration mode.
Enters VoIP dial-peer
configuration mode.
© SAMSUNG Electronics Co., Ltd.
(Continued)