Adding Administrative Group Constraints To An Lsp - Samsung Ubigate iBG3026 Configuration Manual

R1-RSVP-TE
Router#configure terminal
Router/configure# rsvp-trunk T1
Router/configure/rsvp-trunk# primary no-cspf
Router/configure/rsvp-trunk# primary path mypath
Router/configure/rsvp-trunk# primary bandwidth 10m
Router/configure/rsvp-trunk# secondary no-cspf
Router/configure/rsvp-trunk# secondary bandwidth 10m
Router/configure/rsvp-trunk# secondary setup-priority 5
Router/configure/rsvp-trunk# secondary hold-priority 3
Router/configure/rsvp-trunk# to 192.168.0.90
Router/configure/rsvp-trunk#

Adding Administrative Group Constraints to an LSP

To add administrative group constraints(also known as color constraints) to an
LSP:
Configure support for required admin groups in NSM on all participating
routers
Configure required administrative groups on all participating interfaces
The configuration in this example forces the primary LSP to be setup through
links that belong either to admin group A or C. A link that does not belong to
either of these admin groups will not be used for setting up the LSP.
© SAMSUNG Electronics Co., Ltd.
eth 2/1
192.168.0.63
lo
10.10.23.0/24
eth 0/0
R1
eth 2/1
Figure 18.9 Adding Secondary LSP
Ubigate iBG3026 Configuration Guide/Ed.00
192.168.0.60
lo
R2 eth 1/1
192.168.0.90
10.10.21.0/24
eth 0/1
lo
R3
eth 1/1
161