Table 36.2 Falut List - Samsung Ubigate iBG3026 Configuration Manual

It is impossible to set up the value of max DSP channel used as the basis, the
system decides automatically according to the type of the mounted DSP card.
A user is able to check current value set with show running-config command.
SIPEntityFail
This is an alarm created when REGIST is failed after periodically trying
REGISTing gateway using SIP REGISTER message in call-server or SIP proxy.
GW GK Fail Alarm
This is an alarm created when the communication with H.323 Gatekeeper
through RRQ message is failed.
FXOConnect
This is an alarm to notify whether ports are connected or not in analog
channels of FXS card using loop start.
Falut
The fault, which might be occurred, related to Voice Feature of Ubigate
iBG3026 is a fault related to DSP and Voice Task.
When a fault is occurred, a user has to restore it by resetting the system.
Fault Name
DSP init fail
Voice task fail
DSP init fail
This fault occurs when there is an error in the process of initializing the DSP
card, it might occur in the initiation of the system. When a fault occurs the
system cannot be used as voice gateway.
Voice task fail
When operating the Ubigate iBG3026 system, this fault occurs in case that
task related to voice processing suspends. In this case, Ubigate iBG3026
system cannot be used as voice gateway.
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG3026 Configuration Guide/Ed.00

Table 36.2 Falut List

Description
Fail to Initialize DSP resource
Voice task killed
645