Configuration Example; Verifying The Configuration - Samsung Ubigate iBG3026 Configuration Manual

To configure the L3-based CoS marking table, enter:
Router/configure/qos# police
Router/configure/qos/police# l3-cos-map <DSCP(0..63)>
<conformance (green, yellow, red)> [mark-dscp <DSCP(0..63)>
markup <UP(0..7)> mark-dp <DP(0..2)>]
To configure the L2-based CoS marking table, enter:
Router/configure/qos# police
Router/configure/qos/police# l2-cos-map < UP(0..7)>
<conformance (green, yellow, red)> [mark-dscp <DSCP(0..63)>
mark-up <UP(0..7)> mark-dp <DP(0..2)>]

Configuration Example

Router/configure/qos/police# l2-cos-map 0 green mark-dscp 10
markdp 2 mark-up 5
Router/configure/qos/police# no l2-cos-map 0 green
Router/configure/qos/police# l3-cos-map 50 green mark-dscp
20
mark-dp 1 mark-up 4
Router/configure/qos/policy-map map1/policy-class
class1/police# srtcm 100 cbs 100 ebs 200

Verifying the Configuration

Use the following commands to verify the configuration:
show qos policy-class
show qos l2-cos-map
show qos l3-cos-map
show qos policer policy-name map1 policy-class class1
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG3026 Configuration Guide/Ed.00
209