Samsung Ubigate iBG3026 Configuration Manual page 647

Step
4
5
6
7
8
9
10
© SAMSUNG Electronics Co., Ltd.
Command
exit
Example)
sbm/configure/.../custom# exit
dial-peer cor list cor-list-name
Example)
sbm/configure# dial-peer cor list
corlist1
member cor-name
Example)
sbm/configure/.../list list-name#
member corname1
exit
Example)
sbm/configure/.../list list-name#
exit
dial-peer voice {pots|voip} num
Example)
Sbm/configure# dial-peer voice
{pots|voip} 10
corlist incoming cor-list-name
Example)
Sbm/configure/.../pots num#
corlist incoming corlist1
corlist outgoing cor-list-name
Example)
Sbm/configure/.../pots num#
corlist outgoing corlist2
Ubigate iBG3026 Configuration Guide/Ed.00
Purpose
Exits COR configuration mode.
Defines COR list.
Designates member included in COR
list. This step should be repeated
under the necessity. cor-name should
be the cor-name created in step 2.
Exits COR list configuration mode.
Creates dial-peer.
When the appropriate dial-peer is
used as incoming, set up a cor list.
When the appropriate dial-peer is
used as outgoing, set up a cor list.
From step7 to step9 should be
repeated under the necessity, and
designates corlist in dial-peer.
(Continued)
605