Configuration Example
Router/configure/qos/policy-map map1/policy-class class1#
match
ipv4 src-ip 20.30.30.30
Router/configure/qos/policy-map map1/policy-class class1#
match
ipv4 dest-ip 30.40.50.0/24
Router/configure/qos/policy-map map1/policy-class class1#
match
ipv6 src-ip 2002::/64
Router/configure/qos/policy-map map1/policy-class class1#
match
ipv6 ip-proto 10-12
Router/configure/qos/policy-map map1/policy-class class1#
match
ipv6 ip-proto !=10
Router/configure/qos/policy-map map1/policy-class class1#
match
ipv4 ip-proto 17 src-port >=100
Router/configure/qos/policy-map map1/policy-class class1#
match
ipv4 ip-proto 17 src-port <=200
Verifying the Configuration
Use the following commands to verify the configuration:
show qos policy-class
Traffic Policing
Traffic policing allows metering of traffic flows, classification of flows based
on conformance level and assigning CoS based on the above classification.
Two flavors of markers are supported namely srTCM and trTCM. Policing
can be configured using the following commands:
To create a policy class, enter:
Router/configure/qos/policy-map <map-name># policy-class
<classname>
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG3026 Configuration Guide/Ed.00
211