Samsung Ubigate iBG3026 Configuration Manual page 658

CHAPTER 34. Extended VoIP Services
Service
Follow Me
Configuring Services
All the configuring service of Call Manager Interworking mode are done in
the Call Manager. But, for CLID Service enable the function that transfers a
Caller Id to a FXS phone in FXS voice-port.
How to Configure Voice-Port for CLID
To enable the Caller Id function at FXS voice-port follow the below procedures.
Configuration Steps
configure terminal
−
voice-port
−
caller-id enable
−
exit
−
Detailed Steps
Step
1
2
3
4
616
This is the function for a subscriber to dial a Follow Me
feature code and his own telephone number from a phone
where a call forwarding will be done to forward a call to a
desired phone.
Command
configure terminal
Example)
# configure terminal
voice-port slot/subslot/port
Example)
/configure# voice-port 0/1/2
[no] caller-id enable [type1 | type2]
Example)
/configure/voice-port(0/1/2)# caller-id
enable type1
Exit
Example)
/configure/voice-port(0/1/2)# exit
Description
Purpose
Enters global configuration mode.
Enters Voice-Port configuration
mode.
Enables or Disables caller-id
feature.
Exits the current mode
© SAMSUNG Electronics Co., Ltd.
(Continued)