Table 36.18 Vendor Specific Attribute List - Samsung Ubigate iBG3026 Configuration Manual

CHAPTER 36. Management
Account Session ID
Attribute type: 44
Length: >= 3
This attribute is a unique Accounting ID to make it easy to match start and
stop records in a log file. The start and stop records for a given session MUST
have the same Acct-Session-Id. An Accounting-Request packet MUST have
an Acct-Session-Id.
An Access-Request packet MAY have an Acct-Session-Id; if it does, then the
NAS MUST use the same Acct-Session-Id in the Accounting-Request packets
for that session.
vendor specific attribute
Vendor specific attributes used in the Ubigate iBG3026 system are arranged in
the following table and the values of VSA attribute field are as followings.
Type field = 26
Length field >=7 byte(vendor-string field has to be more than 1byte)
Vendor-ID field = 70
String Field is configured as below.
vendor-type = the VSA number that Samsung has designated
vendor-length <= 247 byte
vendor-string = the value expressed as ASCII text messages
VSA No
662

Table 36.18 Vendor Specific Attribute List

Length
4 32
3 12
22 4
15 40
16 40
17 40
18 12
VSA Name
System ID
Call ID
Calling Party Type
Setup Time
Connect TIme
Disconnect Time
Disconnect Cause
© SAMSUNG Electronics Co., Ltd.