Table 36.17 Attribute List - Samsung Ubigate iBG3026 Configuration Manual

Attribute type
30
31
40
44
26
Standard Attribute
Called Station ID
Attribute type: 30
Length: >= 3
This Attribute allows the NAS to send in the Access-Request packet the phone
number that the user called, using Dialed Number Identification(DNIS) or
similar technology. Note that this may be different from the phone number the
call comes in on. It is only used in Access-Request packets.
Calling Station ID
Attribute type: 31
Length >= 3
This Attribute allows the NAS to send in the Access-Request packet the phone
number that the call came from, using Automatic Number Identification(ANI)
or similar technology. It is only used in Access-Request packets.
Account Satus type
Attribute type: 40
Length: 6
This attribute indicates whether this Accounting-Request marks the beginning
of the user service(Start) or the end(Stop).
It MAY be used by the client to mark the start of accounting(for example,
upon booting) by specifying Accounting-On and to mark the end of
accounting(for example, just before a scheduled reboot) by specifying
Accounting-Off.
© SAMSUNG Electronics Co., Ltd.

Table 36.17 Attribute List

Length
>=3
Called Station ID
>=3 Calling Station ID
6 Account Status Type
>=3 Account Session ID
>=7 Vendor Specific Attribute
Ubigate iBG3026 Configuration Guide/Ed.00
Attribute Name
661