Samsung Ubigate iBG3026 Configuration Manual page 617

h225 h245-tunnel {on|off|system}
h225 T301 seconds
h225 T303 seconds
For more information on configuring h323 info, see the 3.2.8.
Configuring Dial Plan Options for VoIP Dial Peers
When configuring dial-plan, different options can be designated depending on
which dial-plan is possessed.
To configure optional dial plan feature, use the following command in dial
peer configuration mode.
incoming-called-number string
Example)
sbm/configure/.../voip num# incoming-called-
number 024....
answer-address string
Example)
sbm/configure/.../voip num# answer-address
2445....
© SAMSUNG Electronics Co., Ltd.
Command
Command
Ubigate iBG3026 Configuration Guide/Ed.00
Purpose
Specifies the H.245 Tunnelling
support.
Maximum time to wait for
CONNECT or RELCOMP
message, after receiving ALERT
message.
Maximum time to wait for
CALLPROCEEDING or
ALERTING or PROGRESS or
RELCOMP message, after
sending SETUP message.
Purpose
(Optional) Selects the inbound dial
peer based on the called number.
(Optional) Selects the inbound dial
peer based on the calling number.
(Continued)
575