Samsung Ubigate iBG3026 Configuration Manual page 562

CHAPTER 31. Digital Voice Port
Step
4
5
Configure Basic Trunk Voice Port Parameters
Using the partial setup function of DS0 group configured in digital trunk,
In most cases, if voice port is created for operating voice port function with
the minimum setup, each command is initialized with default value.
Also supports advanced configuration function to support more detailed setup
or additional setup.
Step
1
2
3
4
5
6
7
520
Command
exit
show voice port
summary
Command
configure terminal
voice-port slot/sub-
slot/port:ds0-group-no
locale locale
compand-type { u-law |
a-law }
description
exit
show voice port
slot/sub-slot/port:ds0-
group-no
Purpose
Exit the module configuration mode
Displays all the voice-port configured in the
system.
Checks out whether the ds0-group just
deleted remains or not.
Purpose
Enter the global configuration mode.
Enter the module configuration mode.
Selects a two-letter country name define in
the voice-port mode. It decides call progress
tone parameters and other locale-specific
parameters.
Specifies commanding standard used. Even
though values setup here are different, TDM
switch enables conversion.
Optional is the setup-represetative ID for
voice-port, and names text string.
Exit the voice-port configuration mode.
Checks out if the values set in voice-port are
normally set up.
© SAMSUNG Electronics Co., Ltd.
(Continued)