Samsung Ubigate iBG3026 Configuration Manual page 401

Detailed Steps
Step
1 configure terminal
Example)
# configure terminal
2 voip-gateway
Example)
/configure# voip-gateway
3 bind media interface type num
Example)
/configure/voip-gateway# bind media
interface ethernet 0/0
4 exit
Example)
/configure/voip-gateway# exit
5.
host ip-address
Instead of specify the source address of signaling and media stream via bind
command, you can directly specify the IP address in the following way.
Configuration Steps
−
−
−
−
Detailed Steps
Step
1 configure terminal
Example)
# configure terminal
© SAMSUNG Electronics Co., Ltd.
Command
configure terminal
voip-gateway
host ip-address
exit
Command
Ubigate iBG3026 Configuration Guide/Ed.00
Purpose
Enters global configuration mode.
Enters voip-gateway configuration
mode.
Sets source interface for media
streams.
Exits the current mode
Purpose
Enters global configuration mode.
359