Samsung Ubigate iBG3026 Configuration Manual page 659

Configuring Feature Codes
To support smooth provision of services, the following feature codes should
be set in a Ubigate iBG3026. The feature codes regarding Call Pickup and
Call Waiting are commonly used regardless of the operation mode. For more
information on feature code settings, see the Command Reference.
No
1 activate-call-conference
2 drop-last-joined-party
3 group-call-pickup
4 direct-call-pickup
© SAMSUNG Electronics Co., Ltd.
Command
Ubigate iBG3026 Configuration Guide/Ed.00
Purpose
It is the feature code to dial prior to a phone
number to call a third party or another for
conference call. During generic call between A
and B, do a hook flash, and then dial 'active-
call-conference feature + C number' When the
call between A and C is placed, do hook flash
again to proceed with the conference call
among A, B, and C. In the same way, up to 6
parties can participate in a conference call.
This feature code is valid only in a Call
Manager Interworking mode.
It is a feature code do terminate the call with
the last-joined subscriber during a conference
call. When A,B,C,D are participating in a
conference call, for example, and D is the last
joined subscriber, if 'A' does hook flash and dial
the drop-last-joined-party feature code, D is
excluded from the conference. This feature
code is valid only in a Call Manager
Interworking mode.
It is a feature code used for Group call pickup
or Universal call pickup. Dial the group-cal-
pickup feature code to pick up the call
terminating toward the subscriber in the pickup
group which is the same as yours. To pick up
the call terminating toward the group being
different from yours, dial a group number
together with a feature code.
If you dial a Direct-call-pickup feature code
together with a phone number, you can pick up
the call terminating toward such number.
617