Samsung Ubigate iBG3026 Configuration Manual page 653

Step
5
6
4.
'fax protocol t38' command in 'voice-service configuration' mode
Configuration Steps
−
−
−
−
−
−
Detailed Steps
Step
1
2
3
© SAMSUNG Electronics Co., Ltd.
Command
fax error-correction-mode
Example)
/configure/dial-peer/voice/voip 1000#fax
error-correction-mode
exit
Example)
/configure/dial-peer/voice/voip 1000#exit
configure terminal
voice service voip
fax protocol t38
fax rate
fax error-correction-mode
exit
Command
configure terminal
Example)
# configure terminal
voice service voip
Example)
/configure#voice service voip
fax protocol t38
Example)
/configure/voice/service/voip#fax
protocol t38 redundancy 0 fallback
pass-through-g711ulaw
Ubigate iBG3026 Configuration Guide/Ed.00
Purpose
enables fax-relay Error
Correction Mode(ECM). to
disable ECM, use 'no fax
error-correction-mode'
command
Exits the current mode
Purpose
Enters global configuration mode.
Enters voice-service configuration
mode.
specifies T.38 for fax relay with VoIP.
- redundancy: specifies the number
of redundant T.38 fax packets to
be sent
- fallback: {none |
pass-through-g711alaw |
pass-through-g711ulaw }
(Continued)
611