Samsung Ubigate iBG3026 Configuration Manual page 435

Step
3
4
Configuring Calling-Info for SIP Calls
This section describes how to set the calling informations for SIP Calls
forcibly. Ubigate iBG3026 ignore the caling name and number received from
Calling party and change them to what configured. To change the calling
information for PSTN-to-SIP call forcibly, you can make a setting using a
calling-info pstn-to-sip command and to change the calling information for
SIP-to-PSTN call forcibly, you can make a setting using a calling-info sip-to-
pstn command.
Restrictions for Calling-Info Feature
This configuration affect all SIP inbound and outbound call. So, be careful to
use this features.
How to Configure Calling-info for PSTN-to-SIP calls
You can set the calling information for PSTN-to-SIP calls in the following way.
Configuration Steps
configure terminal
−
voip-gateway
−
sip-ua
−
calling-info pstn-to-sip
−
exit
−
exit
−
© SAMSUNG Electronics Co., Ltd.
Command
[no] mwi [audible | visible]
Example)
/configure/voice-port(0/1/2)# mwi
audible
Exit
Example)
/configure/voice-port(0/1/2)# exit
Ubigate iBG3026 Configuration Guide/Ed.00
Purpose
Sets a mwi configuration.
Exits the current mode
(Continued)
393