Configuring The Switch; Avaya P330 Default Settings - Avaya P334T-ML Installation And Configuration Manual

Chapter 9
P330 Default Settings
This section describes the procedures for the first-time configuration of the
Avaya
P334T
chapter.

Configuring the Switch

The Avaya P330 may be configured using the text-based Command Line Interface
(CLI), the built-in Avaya P330 Device Manager (Embedded Web) or Avaya
MultiService Network Manager.
For instructions on the text-based CLI, see the Avaya P330 Reference Guide.
For instructions on installation of the graphical user interfaces, see Embedded Web
Manager. For instructions on the use of the graphical user interfaces, refer to the
Device Manager User Guide on the Documentation and Utilities CD.

Avaya P330 Default Settings

The default settings for the Avaya P330 switch and its ports are determined by the
Avaya P330 software. These default settings are subject to change in newer versions
of the Avaya P330 software. See the Release Notes for the most up-to-date settings.
Function
IP address
Subnet Mask
Default gateway
Management VLAN ID
Spanning tree
Bridge priority for Spanning Tree
Spanning tree version
MAC aging
MAC aging time
Avaya P334T-ML User's Guide
. The factory defaults are set out in detail in the tables included in this
Default Setting
149.49.32.134
255.255.255.0
0.0.0.0
1
Enabled
32768
Common spanning
tree
Enabled
5 minutes
57