Configuring The Switch; P334T-Ml Default Settings; Table 4.1 Default Switch Settings - Avaya P334T-ML User Manual

Chapter 4 Installation and Setup

Configuring the Switch

The P334T-ML may be configured using the text-based CLI, the P330 Embedded
Web Manager or Avaya MultiService Network Manager (MSNM).
For instructions on the text-based CLI, refer to Chapter 4, CLI – Layer 2.
For instructions on installation of the Graphical User Interfaces (GUI), refer to
Appendix A, P330 Embedded Web Manager. For instructions on the use of the
graphical user interfaces, refer to the Device Manager User's Guide on the
Documentation and Utilities CD.

P334T-ML Default Settings

The default settings for the P334T-ML switch and its ports are determined by the
P334T-ML software. These default settings are subject to change in newer versions
of the P334T-ML software.
Table 4.1
Function
IP Address
Subnet Mask
Default gateway
Management VLAN ID
Spanning tree
Bridge priority for Spanning
Tree
Keep alive frame transmission
Network time acquisition
TIME server IP address
Timezone offset
Allowed Managers
SNMP Communities
Read-Only
Read-Write
Traps
SNMP retries number
36
Default Switch Settings
Default Setting
149.49.32.134
255.255.255.0
0.0.0.0
1
Enabled
32768
Enabled
Enabled, TIME protocol
0.0.0.0
0 hours
Disabled
Public
Public
Public
3
P334T-ML User's Guide