Chapter 1
lec
Command Mode
Description
Syntax
Sample Output
1-34
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Configuration
Create a LAN Emulation Client (LEC). Use the no form of this
command to delete a LEC.
lec <lecName> [<lecID>]
no lec <lecID>
Table 1-25. Parameters, Keywords, Arguments
Name
lecName
lecID
This example creates then deletes a LEC named "adams" with an
lecID of 90.
ATM(configure)# lec adams 90
LEC adams has been created with ID 90
ATM(configure)# no lec 90
Definition
The name you wish to assign to the LEC. The
LEC name must be between 1 and 31
characters (alpha or numeric).
The LEC identifier. The range of values is:
Minimum = 1, Maximum = 128.
If omitted, the next available lowest number
will be assigned.