Chapter 7
Cajun Campus CLI - Layer 3
Table 7.1
session
event clear
event set
User /Privileged Command Mode
hostname Command
Use the hostname command to change the system prompt used for the router.
This command does not change the system prompt of the stack. To change the
system prompt of the stack, use the host name command in the switch CLI tree.
The syntax for this command is:
[no] hostname [<hostname_string>]
hostname_string
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
show device-mode Command
Use the show device-mode command to show the P333R operating mode you
are currently in. Possible modes are Router, EZ2route or Switch.
The syntax for this command is:
show device-mode
150
System Commands
none – displays current hostname
string – the string to be used as the hostname
(up to 20 characters).
156
157
157
Avaya P333R User's Guide