Supervisor Level Commands - Avaya P333R User Manual

Chapter 5 CLI – Layer 2

Supervisor Level Commands

This level includes all the commands of the User and Privileged Levels (including
all show and set commands).
username
Use the username command to add a local user account. You can only do this
from within the Supervisor Level.
The syntax for this command is:
username <name> password <passwd> access-type{read-only|read-
write|admin}
name
passwd
access-type
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
no username
Use the no username command to remove a local user account.
The syntax for this command is:
no username <name>
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
134
New user name
User's password
Access type definition - read only, read-write or
administrator
Avaya P333T-PWR User's Guide