No Rmon Event - Avaya P333R User Manual

no rmon event

Use the no rmon event command to delete an existing RMON event entry.
The syntax for this command is:
no rmon event <Event Index>
hostname
Use the hostname command to change the Command Line Interface (CLI)
prompt of a module. The current switch number always appears at the end of the
prompt.
The syntax for this command is:
hostname [<hostname_string>]
hostname_string
Note: If this command is to be implemented on a switch other than the stack master,
a session should be opened to the relevant switch.
Avaya P333T-PWR User's Guide
none – displays current hostname
string – the string to be used as the hostname
(up to 20 characters).
Chapter 5 CLI – Layer 2
79