Download/Upload Commands; Dir Command - Avaya P130 User Manual

Chapter 6 Avaya P130 CLI

Download/Upload Commands

Dir Command

The dir command is used to show the file types that have been downloaded to the
module.
The syntax for this command is:
dir [<mod_num>]
<mod_num>
Example:
P130-N> dir
M# file
-- ----
1 p130
1 W133T
1 module-config
Output Fields:
Field
M#
file
ver num
56
Module number
ver num file type
-------- ----------
1.1.5 SW RT Image
1.0.2 SW Web Image
N/A Running Conf
Description
Module number
There are several files loaded into modules memory:
• module-config - file which contains the configuration
settings made to the module.
• stack-config - file which contains the configuration settings
made at the stack level (e.g. IP address of the stack).
• startup-config – file which contains the multilayer policy
configuration settings made to this module.
• running-config - file which contains the multilayer policy
configuration currently in use.
• p130 - file which contains the module software.
• W133T – file which contains the Device Manager
(Embedded Web) software.
• policy-startup - For internal use only.
• policy-running - For internal use only.
S/W Version number – relevant only for the Device
Management S/W
file location file description
------------- ----------------
Flash Bank A Software Image
Flash Bank A Web Image
Nv-Ram module configuration
Avaya P130 User's Guide