Figure 38: Mounting The Ex2200-C Switch On A Wall Using Screws; Figure 39: Attaching A Cable Guard To An Ex2200-C Switch - Juniper EX2200 Series Hardware Manual

Copyright © 2011, Juniper Networks, Inc.

Figure 38: Mounting the EX2200-C Switch on a Wall Using Screws

(Optional) Attach the optional cable guard to protect cable connections:
5.
Use the 3 truss-head screws to attach the cable guard to the bottom of the chassis.
a.
Use the thumbscrews to tighten or loosen the guard to allow you to insert cables.
b.
See Figure 39 on page

Figure 39: Attaching a Cable Guard to an EX2200-C Switch

(Optional) Attach the optional standard cable lock to a security slot on the side of
6.
the switch:
Rope the cable to a desk or a rack and set the lock to the unlocked position.
a.
Insert the lock into a security slot on your chassis and set the lock to the locked
b.
position. See Figure 40 on page
93.
94.
Chapter 8: Installing the Switch
93