Cooling System And Airflow In An Ex2200 Switch; Figure 14: Airflow Through Non-Poe Models Of Ex2200 Switches Except The; Figure - Juniper EX2200 Series Hardware Manual

Cooling System and Airflow in an EX2200 Switch

Copyright © 2011, Juniper Networks, Inc.
Connecting Earth Ground to an EX Series Switch on page 103
The cooling system in EX2200 switches, except EX2200-C, the compact, fanless models,
consists of two fans along the rear of the chassis that provide side-to-rear chassis cooling.
In the PoE models of these switches, there is an additional fan in the power supply.
In the EX2200-C switch the cooling is done by the vents on top and sides of the chassis
in non-PoE models and by heatsinks in PoE+ models. Do not block the vents on the
chassis. Doing this can lead to overheating of the switch chassis.
Figure 14 on page 19 shows the airflow in non-PoE models of EX2200 switches, except
for the EX2200-C models.
Figure 14: Airflow Through Non-PoE Models of EX2200 Switches Except
the EX2200-C Switch Model
Fans
Figure 15 on page 20 shows the airflow in PoE models of EX2200 switches, except
EX2200-C models.
Chapter 2: Component Descriptions
Chassis front
Chassis rear
19