Mounting An Ex2200 Switch On Four Posts Of A Rack Or Cabinet; Figure 29: Mounting The Switch On Two Posts Of A Rack - Juniper EX2200 Series Hardware Manual

Complete Hardware Guide for EX2200 Ethernet Switches
Related
Documentation

Mounting an EX2200 Switch on Four Posts of a Rack or Cabinet

84

Figure 29: Mounting the Switch on Two Posts of a Rack

Mounting rack
Have a second person secure the switch to the rack by using the appropriate screws.
8.
Tighten the screws.
Ensure that the switch chassis is level by verifying that all screws on one side of the
9.
rack are aligned with the screws on the other side.
Connecting Earth Ground to an EX Series Switch on page 103
Connecting AC Power to an EX2200 Switch on page 109
Connecting DC Power to an EX2200 Switch on page 110
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 129
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 131
Mounting an EX2200 Switch in a Recessed Position in a Rack or Cabinet on page 88
Rack-Mounting and Cabinet-Mounting Warnings on page 167
You can mount an EX2200 switch except an EX2200-C switch model on four posts of
a 19-in. rack or cabinet by using the separately orderable four-post rack-mount kit. (The
remainder of this topic uses "rack" to mean "rack or cabinet.")
You can mount the switch on two posts of either a two-post rack or a four-post rack by
using the mounting brackets provided with the switch. See
on Two Posts of a Rack or Cabinet" on page
NOTE: If you need to mount an EX2200 switch except the EX2200-C switch
model in a recessed position on either a two-post rack or a four-post rack,
you can use the 2-in.-recess front brackets provided in the separately
orderable four-post rack-mount kit.
Mounting bracket
"Mounting an EX2200 Switch
81.
Copyright © 2011, Juniper Networks, Inc.