Complete Hardware Guide for EX2200 Ethernet Switches
Related
Documentation
Mounting an EX2200 Switch Using the Magnet Mount
94
Figure 40: Securing the EX2200-C Switch Using Security Slots
Security slot
Security cable
Connecting AC Power to an EX2200 Switch on page 109
Connecting DC Power to an EX2200 Switch on page 110
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 129
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 131
Wall-Mounting Warnings for EX2200 Switches on page 171
This topic applies only to the EX2200-C switch, the compact, fanless model.
You can mount an EX2200-C switch on or under a surface made of ferrous material using
the separately orderable magnet sheet.
WARNING:
When mounting an EX2200-C switch chassis in a vertical position,
orient the front panel of the chassis downward to ensure proper airflow and
meet safety requirements in the event of a fire.
NOTE:
Do not block the vents on the top of the EX2200-C switches. Doing
this can lead to overheating of the switch chassis.
Before mounting the switch using magnet mount:
Ensure that no rubber feet are installed on the bottom of the switch.
Verify that the site meets the requirements described in
for EX2200 Switches" on page
"Site Preparation Checklist
51.
Copyright © 2011, Juniper Networks, Inc.