Optical Interface Support In Ex2200 Switches; Table 13: Management Port Connector Pinout Information For Ex2200 - Juniper EX2200 Series Hardware Manual

Table 13: Management Port Connector Pinout Information for EX2200 Switches
Pin
1
2
3
6
Related
Documentation

Optical Interface Support in EX2200 Switches

Copyright © 2011, Juniper Networks, Inc.
The port uses an autosensing RJ-45 connector to support a 10/100Base-T connection.
Two LEDs on the port indicate link/activity on the port and the administrative status of
the port. See "Management Port LEDs in EX2200 Switches" on page
Table 13 on page 25 provides the pinout information for the RJ-45 connector for the
management port. An RJ-45 cable, with a connector attached, is supplied with the switch.
Signal
TRP1+
TRP1-
TRP2+
TRP2-
See EX2200 Switches Hardware Overview on page 3
Connecting an EX Series Switch to a Network for Out-of-Band Management on page 113
Uplink ports and dual-purpose uplink ports on the front panel in EX2200 switches support
SFP transceivers. This topic describes the optical interfaces supported for those
transceivers. It also lists the copper interface supported for the SFP transceivers.
NOTE: Use only optical transceivers and optical connectors purchased from
Juniper Networks for your EX Series switches.
The two tables in this topic describe the optical interface support over single-mode
fiber-optic (SMF) and multimode fiber-optic (MMF) cables and over the copper interface
for SFP transceivers:
Table 14 on page 26—Optical interface support and copper interface support for Gigabit
Ethernet SFP transceivers in EX2200 switches except EX2200-C switches.
Table 15 on page 37—Optical interface support for Fast Ethernet SFP transceivers
except EX2200-C switches.
Table 16 on page 43—Optical interface support and copper interface support for SFP
Transceivers in EX2200-C switches.
Chapter 3: Component Specifications
17.
Description
Transmit/receive data pair 1
Transmit/receive data pair 1
Transmit/receive data pair 2
Transmit/receive data pair 2
for port location.
25