Radiation And Laser Warnings; Laser And Led Safety Guidelines And Warnings For Ex Series Switches; General Laser Safety Guidelines; Class 1 Laser Product Warning - Juniper EX2200 Series Hardware Manual

CHAPTER 16

Radiation and Laser Warnings

Laser and LED Safety Guidelines and Warnings for EX Series Switches

General Laser Safety Guidelines

Class 1 Laser Product Warning

Copyright © 2011, Juniper Networks, Inc.
Laser and LED Safety Guidelines and Warnings for EX Series Switches on page 161
Radiation from Open Port Apertures Warning on page 163
EX Series switches and the XRE200 External Routing Engine are equipped with laser
transmitters, which are considered a Class 1 Laser Product by the U.S. Food and Drug
Administration and are evaluated as a Class 1 Laser Product per EN 60825-1 requirements.
Observe the following guidelines and warnings:
General Laser Safety Guidelines on page 161
Class 1 Laser Product Warning on page 161
Laser Beam Warning on page 162
When working around ports that support optical transceivers, observe the following
safety guidelines to prevent eye injury:
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
WARNING: Class 1 laser product.
161