Mounting An Ex2200 Switch; Table 26: Ex2200 Switch Mounting Methods; Unpacking An Ex2200 Switch - Juniper EX2200 Series Hardware Manual

Complete Hardware Guide for EX2200 Ethernet Switches
Table 25: Parts List for EX2200 Switches (continued)
Component
RJ-45 cable and RJ-45 to DB-9 serial port adapter
Cable guard and 3 number-8 Phillips truss-head screws (EX2200-C models only and separately orderable)
Quick Start installation instructions
Juniper Networks Product Warranty
End User License Agreement
Related
Documentation

Mounting an EX2200 Switch

Table 26: EX2200 Switch Mounting Methods

Mounting Method
Desk or other level surface
(using rubber feet)
Desk or other level surface
(using screws)
Two-post rack or cabinet
Four-post rack or cabinet
Recessed position
74
NOTE: You must provide mounting screws that are appropriate for your rack
or cabinet to mount the chassis on a rack or a cabinet.
Unpacking an EX2200 Switch on page 72
EX2200 Switches Hardware Overview on page 3
Table 26 on page 74 lists the methods you can use to mount an EX2200 switch.
Switch Model
EX2200
EX2200-C
EX2200-C
EX2200
EX2200-C
EX2200
EX2200-C
EX2200
Comments
On a desk or other level surface by using rubber feet provided with
the switch
On or under a desk or other level surface by using screws
On two posts in a 19-in. rack or cabinet by using the mounting
brackets.
On four posts in a 19-in. rack or cabinet by using the separately
orderable four-post rack-mount kit
On two posts in a 19-in. rack or cabinet by using the two post
rack mounting brackets.
In a position recessed 2 in. from the front of a 19-in. rack or cabinet
by using the 2-in.-recess front brackets in the separately orderable
four-post rack-mount kit. You can mount the switch in this recessed
position on two-post or four-post racks and cabinets
Quantity
1
-
1
1
1
Copyright © 2011, Juniper Networks, Inc.