Figure 22: Attaching A Cable Guard To An Ex2200-C Switch; Figure 23: Securing The Ex2200-C Switch Using Security Slots - Juniper EX2200 Series Hardware Manual

Related
Documentation
Copyright © 2011, Juniper Networks, Inc.

Figure 22: Attaching a Cable Guard to an EX2200-C Switch

(Optional; applies only to EX2200-C models) Attach the standard cable lock to the
6.
security slots on the both sides of the switch:
Rope the cable to a desk or a rack and set the lock to unlocked position.
a.
Insert the lock into one of the security slot on your chassis and set the lock to the
b.
locked position. See

Figure 23: Securing the EX2200-C Switch Using Security Slots

Security slot
Security cable
Connecting AC Power to an EX2200 Switch on page 109
Connecting DC Power to an EX2200 Switch on page 110
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 129
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 131
Clearance Requirements for Airflow and Hardware Maintenance for EX2200 Switches
on page 60
Figure 23 on page 77.
Chapter 8: Installing the Switch
77