Power Supply In Ex2200 Switches; Table 8: Status Led On The Management Port On Ex2200 Switches; Table 9: Power Consumed By Ex2200 Switches - Juniper EX2200 Series Hardware Manual

Complete Hardware Guide for EX2200 Ethernet Switches

Table 8: Status LED on the Management Port on EX2200 Switches

LED
Status
Related
Documentation

Power Supply in EX2200 Switches

Table 9: Power Consumed by EX2200 Switches

Model Number
EX2200-C-12T
EX2200-C-12P
EX2200-24T
EX2200-24P
EX2200-24T-DC
EX2200-48T
EX2200-48P
Related
Documentation
18
Color
Green
Connecting an EX Series Switch to a Network for Out-of-Band Management on page 113
The power supply in EX2200 switches is built in along the rear panel of the chassis, with
an AC power cord inlet or DC power terminals on the rear panel to connect power to the
switch.
Table 9 on page 18 lists the power consumed by each EX2200 switch model. The
maximum power available on a PoE port is 30 W for switches running Junos OS Release
10.3 or later and 15.4 W for switches running Junos OS Release 10.2 or earlier.
Number of PoE-Enabled
Ports
–
12
–
24
–
–
48
AC Power Cord Specifications for EX2200 Switches on page 66
EX2200 Switches Hardware Overview on page 3
Power Specifications for EX2200 Switches on page 65
Connecting AC Power to an EX2200 Switch on page 109
Connecting DC Power to an EX2200 Switch on page 110
State and Description
Indicates the speed. The speed indicators are:
One blink per second—10 Mbps
Two blinks per second—100 Mbps
Maximum Power
Consumed by the Switch
30 W
30 W (when no PoE power is
drawn)
50 W
60 W (when no PoE power is
drawn)
50 W
76 W
91 W (when no PoE power is
drawn)
Copyright © 2011, Juniper Networks, Inc.
Maximum PoE Power
Available
–
100 W
–
405 W
–
–
405 W