Juniper EX2200 Series Hardware Manual page 31

Table 3: CLI Equivalents of Terms Used in Documentation for EX2200 Switches (continued)
Hardware Item (as Description (as
displayed in the CLI) displayed in the CLI)
One of the following:
One of the following:
Xcvr (n) Abbreviated name of
the transceiver
Power supply (n) Built-in power supply
Fan Fan
NOTE:
switches are fanless
models.
Related
Documentation
Copyright © 2011, Juniper Networks, Inc.
Value (as displayed
in the CLI)
PIC 0
12x 10/100/1000
BASE-T
24x 10/100/1000
BASE-T
48x 10/100/1000
BASE-T
PIC 1
2x (10/100/1000
BASE-T or GE SFP)
or
2x (100/1000
BASE-X)
4x GE SFP
n is a value equivalent
to the number of the
port in which the
transceiver is installed.
Value of n is always 0.
–
EX2200-C
EX Series Switches Hardware and CLI Terminology Mapping
EX2200 Switches Hardware Overview on page 3
Chapter 1: EX2200 Switch Overview
Item in Additional
Documentation Information
Built-in network ports "EX2200 Switches
on the front panel of Hardware Overview"
the switch on page 3
Built-in uplink ports "EX2200 Switches
and dual-purpose Hardware Overview"
uplink ports on the on page 3
front panel of the
switch
Optical transceivers "Optical Interface
Support in EX2200
Switches" on page 25
AC power supply "Power Supply in
EX2200 Switches" on
page 18
Fan "Cooling System and
Airflow in an EX2200
Switch" on page 19
11