Step 2: Install The Mounting Hardware; Install The Mounting Hardware In A Four-Post Rack Or Cabinet - Juniper T320 Quick Start Manual

Step 2: Install the Mounting Hardware

Install the Mounting Hardware in a Four-Post Rack or Cabinet

Copyright © 2015, Juniper Networks, Inc.
To install the mounting hardware, perform the appropriate procedure for your rack or
cabinet type:
Install the Mounting Hardware in a Four-Post Rack or Cabinet on page 7
Install the Mounting Hardware in an Open-Frame Rack on page 9
To install the mounting hardware for a four-post rack or cabinet:
Install cage nuts, if needed.
Install the large mounting shelf and the spacer bars on the front rack rail.
Install the small mounting shelf on the rear rack rail.
Remove the center-mounting brackets from the chassis.
Figure 2: Mounting Hardware for a Four-Post Rack or Cabinet
Step 2: Install the Mounting Hardware
7