EPSON Stylus Pro 7600/9600
5.1.4.9 Cover Sensor ASSY Adjustment
Described below are the adjustment items to be made once the
(p.197)
has been replaced.
Adjustment items (steps):
Table 5-11. Required Adjustment Items
Step
Adjustment Item
<Mechanism Adjustment>
1 Sensor position adjustment
<Start the Self-diagnostic Function>
[Paper Feed ∆]
(Power OFF →
→ Power ON)
2 Testing will be executed by "Sensor" (Test menu) → "Cover"
Note "*": The gap is acceptable, if it does not permit entrance of your finger when the
Front Cover is opened and "COVER OPEN" is displayed.
Adjustment
Cover Sensor ASSY
*
[Paper Feed ∇
+
]+[Cut/Eject]
5.1.4.10 PF Encoder Sensor ASSY Adjustment
Described below are the adjustment items to be made once the
ASSY (p.186)
has been replaced.
Adjusting tools:
PF ENC sensor positioning tool #F764
Cutter Positioning Jig #F800
See
Scale 1000mm #F713
Scale Stopper #F714
p.267
Adjustment items (steps):
p.220
Step
p.224
<Mechanism Adjustment>
1 PF ENC Installation Position Adjustment
<Start the Self-diagnostic Function>
(Power OFF →
→ Power ON)
2 Feed Correction + T&B Adjustment
3 Rear Sensor Position Adjustment
Overview
Table 5-12. Required Adjustment Items
Adjustment Item
[Paper Feed ∆]
[Paper Feed ∇
+
]+[Cut/Eject]
Revision A
PF Encoder Sensor
See
p.272
p.220
p.239
p.243
216