Panel Unit - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

4.2.1 Panel Unit

1. Release the clips on both sides of the control panel unit and pull slightly away from the
R Side Cover.
(See Figure 4-4)
2. Remove the FFC cable from the connector and hook.
(See Figure 4-5)
Make sure that the Panel FFC does not get twisted round the
carriage driven pulley inside the printer.
Disassembly & Assembly
Push
Clip
Removing the Panel Unit and Housing
Panel Unit
Lock
Figure 4-4. Panel Unit Removal 1/2
FFC
Clip
Figure 4-5. Panel Unit Removal 2/2
Revision A
Push
Panel Unit (back side)
Connector
Clip
Hook
159